View Full Version : Overclocking: - whats your GHz
Colonel Mitch
23rd December 2007, 01:58 PM
Just thought it'd b fun if those of you out there who are bold enough to enter the realm of overclocking would post some cpu-z shots some of your clocks for comaprison - also list your cooling:)
I havent tried very hard yet but i can easily get this out of mine, though with phase change cooling i should be able to get to almost 5:)
http://www.atkcommunity.com/imagehosting/thum_64476e5b417ed4f.jpg (http://www.atkcommunity.com/vbimghost.php?do=displayimg&imgid=213)
Have fun and good luck!
Hardietbh
23rd December 2007, 02:46 PM
bloodyhell thats alot, got a e6550@3.2ghz with standard cooler
Chalex4
23rd December 2007, 03:03 PM
I am going to be overclocking my Q6600 as soon as my Thermalright Ultra-120 Extreme CPU Cooler (http://overclockers.co.uk/showproduct.php?prodid=HS-039-TR) arrives, then I will post a screenshot :D.
Hutch
23rd December 2007, 03:13 PM
done a bit of changes to my RAM speed, and overclocked my 3000+ slightly to get a bit more life out of it. Bit scared otherwise.
ez64
23rd December 2007, 05:55 PM
I got my 5200 to 3.6 ish, and 800mhz ram to nearly 1k with low enough timings.
Marshy
23rd December 2007, 10:30 PM
Whats overclocking
VoX
24th December 2007, 02:54 PM
If I over clocked my crap PC it would be like a nuclear blast... (Yes it is that bad, I'll try and find a list of system specs)
Anyway I advise not going to PC World as my PC cost my parents £1,200 roughly and it's complete crap.
Hardietbh
24th December 2007, 03:32 PM
aye pc world rip you off
ez64
24th December 2007, 08:00 PM
heres the stock again will post up overclocking soon.
http://img517.imageshack.us/img517/149/ez1ci2.png
Chalex4
1st January 2008, 12:12 AM
I installed my new CPU cooler today and it works like a charm. I am currently at 3.2GHz, which reaches about 52°C (avg.) at full load using Prime95 and Core Temp. I will definitely be increasing this to as high as I can get it over the next week or so.
Hutch
1st January 2008, 02:35 AM
I wont towin sumthing on the ggs, hourrses you kwon!
rts_j03
21st January 2008, 08:26 PM
Liquid nitrogen ftw!
VoX
16th June 2009, 06:57 PM
Just having fun atm, staying at the stock voltage (1.3V) and just raising a bit. (Yes, I know I'm only up 0.1Ghz lol, I will go higher at some point.)
http://img44.imageshack.us/img44/9712/63169538.jpg
Vicious Horizon
16th June 2009, 07:40 PM
F-F-F-F-F-F-F-FUCKING N-N-N-N-N-N-N-NECRO-CRO-cro-cro-ro-ro-o
That aside.. sick =D
VoX
16th June 2009, 07:52 PM
3.2Ghz Intel Burn Test 100% Stable.
http://img197.imageshack.us/img197/1756/32oc.jpg
Not too bad for stock volts :p.
EDIT: 3DMark Results.
http://img39.imageshack.us/img39/1756/32oc.jpg
ez64
16th June 2009, 09:24 PM
Ohhh shiny :D
VoX
16th June 2009, 09:27 PM
Running P95 now, it's nowhere near as stressing as the IBT, it only gets up to 49C at max load...
http://valid.canardpc.com/show_oc.php?id=587623
Colonel Mitch
18th June 2009, 01:04 PM
Running P95 now, it's nowhere near as stressing as the IBT, it only gets up to 49C at max load...
http://valid.canardpc.com/show_oc.php?id=587623
Tisc Tisc.....
True overclockers dont monitor temperature :D
What you want is looping of 3dmark06's cpu tests 3 times :D
Set your bios to emergency shutdown at 105*C
If it turns off its too hot, and if it crashes it needs more voltage :D
Thats how i did it at i31 anyway, over 4.2 GHZ from a qx6700 on a Coolermaster Aquagate mini R80 (http://www.cluboc.net/REVIEWS/super_cooling/CoolerMaster/MiniAquagateR80/index.htm) :)
- they are probably the worst watercooling availible btw if you read reviews, worse than a decent fan stack :P
At i31 i had that cooler with 2 big high speed case extractor fans, running at over 90-100 *C xD
VoX
18th June 2009, 04:13 PM
Lol, I'll keep that all in mind Mitch :p. I may have a shot at getting as high as poss over the weekend.
I've been debating going for a water-cooled setup as my next upgrade, but from reading around it would be too much hassle every time I upgrade a video card. The TRUE is good enough to not need to be replaced by an enclosed CPU Water-cooling system, and I may just grab two 1900RPM Scythe Kazi's (http://www.overclockers.co.uk/showproduct.php?prodid=FG-022-SY&groupid=701&catid=57&subcat=4) for a push-pull system with a CPU Upgrade in a year (Hopeful for a cheap QX9650 :p) (And yes, I have high noise tolerance levels lol.)
VoX
20th July 2009, 11:50 AM
Update:
Have day to myself, so am spending it go high :p.
http://valid.canardpc.com/cache/screenshot/607110.png
http://valid.canardpc.com/show_oc.php?id=607110
3.5Ghz is tops atm, going to go and see if I can break the 4Ghz barrier.
(Voltage is around 1.37 atm, load temps are 73C max)
Calneon
20th July 2009, 12:26 PM
I use Orthos for dual core CPUs, meant to be the best.
My E6400 CPU has been at 3.2Ghz for a few years, a 50% overclock from 2.13Ghz stock. CPUZ says the voltage is 1.37, don't know how accurate that is though.
Isphera
20th July 2009, 12:45 PM
Have day to myself, so am spending it go high :p.
Um..you have the house to yourself, and your first choice of activity is overclocking? I am hereby revoking your dude membership.
Vicious Horizon
20th July 2009, 12:53 PM
Lol, agreed Orix XD
VoX
20th July 2009, 01:06 PM
Um..you have the house to yourself, and your first choice of activity is overclocking? I am hereby revoking your dude membership.
Have PS3 in my room with interwebz, was first thing I did :p.
Calneon
20th July 2009, 02:03 PM
Have PS3 in my room with interwebz, was first thing I did :p.
Nice.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.